Power Amplifiers

Power Amplifier Test Checklist for Second-Hand Purchases

What a used amplifier test report should include — and which failures are worth fixing.

Ask for a load test, not a power-on photo

An amplifier that lights up can still fail under load. A useful test report lists each channel driven into a resistive load at rated power for at least 15 minutes, with output voltage and temperature recorded. Ask for the test date and the load used. If the seller only sends a photo of the front panel, treat the unit as untested.

Check channel balance and protection

Feed the same signal into every channel and compare output. More than 0.5 dB of difference between channels suggests ageing components or a previous repair. Test the protection circuits by simulating a short and confirm the channel recovers. Fan noise and filter condition matter too: a noisy fan is cheap to fix, but a swollen capacitor bank is not.

Review service history

A documented fan or capacitor replacement is better than an untouched unit of unknown age. Ask for the serial number and check whether the model still receives service support. For touring amps, confirm the rack ears and rear connectors are original.

Price the accessories

Power cables, rack ears and flight cases add up. A used amplifier that includes a proper case is often better value than a cheaper bare unit once packing and freight are counted.

Units mentioned in this guide

Lab.gruppen FP 10000Q
Lab.gruppen FP 10000Q
$2,300per unit

Tell us what you need

Send a model list, target budget and destination port. We reply with availability, condition photos and a written quote — usually within one business day.

peishengc4@gmail.comWhatsApp +86 135 2775 8303