Line Array Systems

Used Line Array Buying Guide: What to Check Before You Ship

Five checks that separate a serviceable used line array from an expensive repair project — rigging, drivers, processing and paperwork.

Start with the rigging, not the paint

Rigging is the part buyers underestimate. Ask for close-up photos of every frame, link and pin, plus the serial numbers stamped on the cabinets. Repainted or welded hardware is a warning sign: replacement rigging is expensive and may not be available for older models. If the seller cannot show the frames loaded, budget for a replacement set before you agree on a price.

Verify drivers and processing

A line array can look clean and still have shifted magnets or rubbing voice coils. Request an impedance sweep for every cabinet and a short video of a low-level sine sweep. Confirm which presets the cabinets need and whether the matching processor is included. Without the correct presets, a cheap array can turn into a processor purchase on day one.

Price the whole system

Add amplification, cabling, rigging, road cases and freight before comparing quotes. A used array that includes frames and covers is often cheaper than a bare cabinet set. Ask for a loading list and check cabinet dimensions against your truck or container plan.

Paperwork that protects you

Serial numbers on the invoice, the test report and the packing list should match the units you receive. Cosmetic wear is normal at Grade B; undisclosed driver faults are not. Keep the listing photos and the test report until the units are installed and verified.

Units mentioned in this guide

Tell us what you need

Send a model list, target budget and destination port. We reply with availability, condition photos and a written quote — usually within one business day.

peishengc4@gmail.comWhatsApp +86 135 2775 8303